ORTMANN TYRES

Ortmann Tyres
Thanks to these excellent tyres, by Michael Ortmann, many slot cars that had been put into retirement due to hard and cracked o.e.m tyres, are now once again racing in all their glory.
Cars like the "Powersledge" Formula 1 range from Scalextric are again being raced in anger. The ever increasing range has tyres to fit a considerable number of the early Scalextric cars, along with Cox, Monogram, K&B, Airfix & Revell. 
Even if you are not intending to race your collection of "classic" cars, these tyres will bring any restoration project up to scratch. Imagine all that hard work restoring an early Scalextric C68 Aston Martin, only to be spoilt because the tyres have gone hard and cracked.
Click on the appropriate tab below to view our lists of tyres and if you see the tyre you need then all you have to do is fill in the order form.
The fittings listed are not definitive. To list every fitting for every tyre would need a book, particularly in the case of Scalextric models. The "C" numbers given are as a guide only. Since tyres even varied on the same model we cannot quote every "C" number against every tyre. If you order a tyre that is not what you had in mind then we will happily exchange it or refund your money. ANY INFORMATION ON FITTINGS IS ALSO VERY HELPFUL. Thanks!

Vintage Restoration Tyres & Scratchbuild

PLEASE CLICK ON THUMBNAILS OR ITEM DESCRIPTION FOR A LARGER PICTURE

Cox fitting

Part No. Image Description Price
(Per Pair)
19
Cox style "F" rear
To fit Cox wheels. Tyre is 12mm x 27mm. Fits Chaparral.
6.00
19a
Cox style "F" front
To fit Cox wheels. Tyre is 12mm x 25mm. Fits Chaparral.
5.00
19b
Cox style "GY" rear
To fit Cox wheels. Tyre is 12mm x 26mm. Fits Cheetah and GT40.
6.00
19c
Cox style "GY"front
To fit Cox wheels. Tyre is 10mm x 25mm. Fits Cheetah and GT40.
5.00
19d
Cox style "DP" rear
To fit Cox wheels. Tyre is 10mm x 26mm. Fits F1 cars and Lotus 30/40.
6.00
19e
Cox style "DP" front
To fit Cox wheels. Tyre is 10mm x 25mm x 7mm. Fits F1 cars and Lotus 30/40.
5.00
19f
Cox style "DP" front
To fit Cox wheels. Tyre is 10mm x 25mm x 4mm - for Ackermann steering.
5.00
19g
Cox style "DP" Lotus 30/40 rear
To fit Cox Lotus 30/40 rear wheels. Tyre is 11.3mm x 27mm x 12.3mm.
6.00
19h
Cox style "DP" Dino rear
To fit Cox wheels. Tyre is 9mm x 23mm for Ferrari Dino.
6.00
19j
Cox style "DP" Dino front
To fit Cox wheels. Tyre is 8mm x 19mm for Ferrari Dino.
5.00
19y
Cox style 1/32 "GY" rear
To fit Cox wheels. Tyre is 9mm x 20mm
4.25
19z
Cox style 1/32 "GY" front
To fit Cox wheels. Tyre is 8mm x 21mm
3.50

K&B fitting

Part No. Image Description Price
(Per Pair)
45
K&B style 1/32 Rear Stock Car
Rear tyre 25mm x 9mm, 14mm centre. "G Y" on tyre wall.
4.50
45a
K&B style 1/24 "GY"
Front & rear to fit Porsche 904 & GT40
4.00
45b
K&B style 1/24 "GY" Rear
Rear to fit Cobra, Chaparral etc.
4.50
45c
K&B style 1/24 Rear extra wide
Extra wide rear to fit Lola T70, Ferrari P2 etc
5.00
45d
K&B style 1/32 Rear "Sports Car Special"
Rear tyre 21mm x 8mm, 11mm centre. "Sports Car Special" on tyre wall.
4.00

Monogram fitting

Part No. Image Description Price
(Per Pair)
39
Monogram style 1/32 F1 rear slick (9mm)
Fits F1 & Revell 1/32
4.25
39a
Monogram style 1/32 front (6mm)
Fits F1, GT40 & Revell 1/32
3.25
39b
Monogram style 1/32 rear (7mm)
Fits first series early issue cars & Revell 1/32
3.75
39c
Monogram style 1/32 F1 wide rear (9mm)
Fits second series cars & Revell 1/32
4.25
39d
Monogram style 1/24 front
Fits 1/24 front
4.50
39e
Monogram style 1/24 rear
Fits Porsche Carrera GTS, Scarab.
5.00
39f
Monogram style 1/24 extra wide rear
Fits Ferrari 250LM, Chapparal 2C
5.50

Revell fitting

Part No. Image Description Price
(Per Pair)
50
Revell style 1/24 "DP" front
Fits Revell 1/24 front
4.00
50b
Revell style 1/24 "GY" front
Fits GT cars. Rear Lotus 23
4.00
50c
Revell style 1/24 "GY" rear
Fits all round Porsche 262C
5.00
50d
Revell style 1/24 extra wide rear for racing
Fits Corvette Stingray, AC Cobra, Ferrari 250 GTO
5.50
50e
Revell style 1/32 Front and Rears treaded
For 60's slot cars. 20 x 5mm with 10mm centre.
3.75
50k
Revell style 1/32 Rears treaded
Rears 10 x 21.5 x 8.5mm. Fits Camaro, Mustang, Cougar, Firebird.
4.50
50L
Revell style 1/32 fronts treaded
Fronts 10 x 21.5 x 6mm. Fits Camaro, Mustang, Cougar, Firebird.
3.75
50m
Revell style 1/32 rears slick
Rears 11.5 x 21 x 7.5mm. Fits Chapparal, Lang Cooper, Cobra, SP80 chassis cars - 250GTO, 300SL, Cobra.
4.50
50n
Revell style 1/32 fronts slick
Fronts 9 x 20 x 5mm. Fits Chapparal, Lang Cooper, Cobra, SP80 chassis cars - 250GTO, 300SL, Cobra.
3.50
50r
Revell style 1/24 rear for lexan bodies
Rear slick 25.5mm x 12mm with 10mm centre
5.00

Russkit fitting

Part No. Image Description Price
(Per Pair)
26
Russkit style "DP" rear
11mm x 25mm
5.00
26a
Russkit style "DP" front
4.25

Airfix/MRRC fitting

Part No. Image Description Price
(Per Pair)
52
Airfix "C" style
Fits Autounion, Mercedes 154, Maserati large wheel.
3.75
52a
Airfix "C" style
Same as tyre #52 but for smaller diameter wheels
3.75
52b
Airfix/MRRC style
Fits Slimline chassis
3.75
52c
Airfix/MRRC style
Fits Ballrace chassis
3.75
52d
Airfix/MRRC style
Fits Highspeed chassis
3.75
52e
Airfix/MRRC style
Fits Home Set F1 cars fronts
3.50
52f
Airfix/MRRC style
Fits Home Set F1 cars rears
4.50
52g
Airfix/MRRC style
Fits Mercedes FWD rear. Diamond pattern.
4.00
52h
Airfix/MRRC style
Fits Mercedes FWD front. Diamond pattern.
3.50
52j
Airfix/MRRC style
Fits MRRC frame motor chassis rears/scratchbuilding.
4.00
52k
Airfix/MRRC style
Fits MRRC frame motor chassis fronts/scratchbuilding.
3.50
52m
Airfix/MRRC style
Fits Airfix Mini front and rear.
4.00

Fleischmann fitting

Part No. Image Description Price
(Per Pair)
32
Fleischmann style Lotus 40
Fits Lotus 40 rear.
3.00
32a
Fleischmann style Mercedes 230
Fits Mercedes 230 front &rear.
3.00
32b
Fleischmann style Lotus 40
Fits Lotus 40 front.
3.00
32c
Fleischmann style F1
Fits F1 rear. "C".
3.50
32e
Fleischmann style F1
Fits F1 rear. "Re".
3.50
32f
Fleischmann style F1
Fits F1 front. "Re".
3.00
41f
Faller/Fleischmann style
Fits 1/32 10.5mm x 21mm "Goodyr".
4.25

Jouef fitting

Part No. Image Description Price
(Per Pair)
31
Jouef style rear
Fits Jouef.Outside dia.20mm. Centre 9mm. Width 5mm. Excellent for scratch building. Fits BWA 13" wheels
3.25
31a
Jouef style front
Fits Jouef.Outside dia.18mm. Centre 9mm. Width 4.5mm.
3.50

Polistil fitting

Part No. Image Description Price
(Per Pair)
35a
Polistil style Small
Fits Polistil.Outside dia.18mm.
3.50
35b
Polistil style Large
Fits Polistil.Outside dia. 21.5mm.
4.50

Supershells fitting

Part No. Image Description Price
(Per Pair)
41s
Supershells style rear.
Supershells doughnut style rear slick.
3.50

Scratchbuild

Part No. Image Description Price
(Per Pair)
1a
Scratchbuild
Suitable for 1/24 applications
"G" lettering on tyre wall. i/d 17mm x o/d 27mm x w 23mm.
4.50
3
Scratchbuild
Suitable for 1/24 applications
"G" lettering on tyre wall. i/d 15mm x o/d 25mm x w 18mm.
4.50
4
Scratchbuild
Suitable for 1/24 applications
"G" lettering on tyre wall. i/d 15mm x o/d 26mm x w 17mm.
4.50
12
Scratchbuild
Suitable for 1/24 applications
No lettering. i/d 15mm x o/d 24mm x w 12mm.
4.50
13
Scratchbuild
Suitable for 1/24 & 1/32 applications
No lettering. i/d 13mm x o/d 22mm x w 15mm.
4.50
14
Scratchbuild
Suitable for 1/24 & 1/32 applications
No lettering. i/d 12mm x o/d 20mm x w 12mm.
4.50
15
Scratchbuild
Suitable for 1/24 & 1/32 applications
No lettering. i/d 12.5mm x o/d 21mm x w 10mm.
4.50
16
Scratchbuild
Suitable for 1/32 applications
"G" lettering on tyre wall. i/d 9mm x o/d 20mm x w 13mm.
4.50
16a
Scratchbuild
Suitable for 1/32 applications
No lettering. i/d 9mm x o/d 21mm x w 20mm.
4.50
16b
Scratchbuild
Suitable for 1/32 applications
No lettering. i/d 10mm x o/d 22mm x w 20mm.
4.50
18v
Scratchbuild
Suitable for 1/24 & 1/32 applications
"C" lettering on tyre wall. i/d 14mm x o/d 25mm x w 8mm. Was tyre #17.
4.50
24d
Scratchbuild 1/32
Suitable for open wheel cars i.e 50's Formula 1 fronts, and early GT/saloons requiring narrow tyres.
24x5 x9mm centre. Lettering on tyre wall.
3.25
28m
Scratchbuild 1/32
Suitable for open wheel cars i.e 50's Formula 1, as used and supplied by Mac Pinches
3.50
46
Scratchbuild 1/24 rear
Suitable for open wheel cars i.e 50's Formula 1
i/d 16mm x o/d 30mm. Possible use for big wheel 1/32 cars of this type.
4.50
46a
Scratchbuild 1/24 front
Suitable for open wheel cars i.e 50's Formula 1
i/d 16mm x o/d 29mm. Possible use for big wheel 1/32 cars of this type.
4.50

Scratchbuild Wheels
See our Accessories page for alloy wheels for Scratchbuilding